877-284-4781 - 8331 NW 66th Street, Miami, Florida USA 33166

Premium Glow in the Dark Tape

Premium Glow in the Dark Tape

$9.78$5,904.06

 

A flexible polyester laminated photoluminescent film coated with a permanent acrylic pressure-sensitive adhesive and backed with a 5 mil poly coated paper release liner. The photoluminescent pigments absorb and store energy from normal, ambient light. In sudden darkness, the tape is immediately visible. These tapes are a non-electric safety system that easily and inexpensively affixes to walls, handrails, columns, around doorframes, and along stairways and baseboards. Tape will glow in total darkness after exposure to artificial or natural light – it is fully charged within 30 minutes.

Glows brightest the first 30 minutes after activation has ceased, but will remain clearly visible in a totally dark room to the night- adapted eye for 6, 10, and 24+ hours.

These tapes are screen printable. They can also be die-cut and kiss cut using steel rule dies. 3” neutral paper cores.

Application:

Used for identification of critical equipment controls, light switch covers, exit and directional signage – especially for escape routes and stairways. Tape clearly labels safety equipment and provides a safe, illuminated path through stairwells, halls, rooms, and other potentially hazardous areas. Simple and inexpensive to install position, peel off backing, and adhere, this safety system requires virtually no maintenance. Used in hotels, hospitals, schools, public facilities, office buildings and manufacturing plants – wherever people need a safe, reliable high and low-level egress pathway in case of an emergency, such as sudden power outages or the spread of smoke. Product has excellent resistance to UV light and does not show significant degradation when used outdoors. Also used for labels, decals, novelties, sporting goods, trims, special effects, etc.

Physical Properties:

Color   Light Green
Nominal Thickness (film/adhesive)   10 mil +/-10%
Release Liner Thickness   5 mil
Adhesive Type   Solvent based Acrylic
Adhesion to SST   72 oz/inch – 24 hour dwell
Shear Adhesion to SST (1/2” x 1/2”, 500 gram)   >6, 10, 24 hours
Minimum application temperature   50°F
UV Stability   Excellent
Glow Properties of PGD-10   6, 10, 24+ hours
-DIN 67510 Xe Lamp; 1000 Lx/5min   (time span necessary for afterglow brightness to diminish to 0.32 mcd/ m2 – 100X human eye perception)

Alternative to Jessup #7520 #7530 #7550

Note: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.

Additional information

Weight 3 lbs
Size

10 Yards, 50 Yards

Intensity

10 Hour, 24 Hour, 6 Hour

Pack Size

Single Roll, Case, Subpack

Tape Width

1/2" (12mm), 4" (96mm), 3" (72mm), 2" (48mm), 1.5" (36mm), 1" (24mm), 3/4" (18mm)

SKU: 76019 76030 76050 - Need Help? Contact Us Leave Feedback

Categories: